LED Miner Lamp HID 750lumens

LED miner lamp

1> Materials: Hard-anodized anti-abrasive Aluminium
2> Input Voltage: 9 to 16V
3> Working Voltage: 12.6V
4> Working Current: 1.4A
5> Illuminious intensity: 750LM
6> Color Temperature: 6000K(4200K to 10000K)
7> Output power: 10W
8> IP grade: IPX3
9> Battery: ICR18650*3S2P(6600mAh)
10> Lighting distance: 500 meters
11> Power Efficiency: 75LM/W
12> Lighting time: 4 hours

Safety Protection Instructions;
A: Open circuit protection; Start with the lights, open circuit when the output occurs when abnormal conditions, stop working in one second to enter the protected status.
B: Short circuit protection; Start the lamp, when the output short-circuit is abnormal, stop working in one second to enter the protected status.
C: Battery overcharge and over discharge protection; Charging voltage to achieve  The specified automatic protection, care, discharge voltage when a specified automatic protection.
D: Short-circuit protection; When the positive and negative short-circuit the battery, the battery protection board will immediately power off, and access to protected status.  Usage; A: Light before using this product, the first head part fixed to the head,  The lamp power cable connector corresponds to the battery power connector plugged  In tight. B: Press the Stubbs the opening lights to achieve light on features.
C: Regulation Dengying: Beam can be adjusted by rotating the head best.
D: Charge; Unplug charging sleeve, plug in the charger (charger green light indicates when the battery is full), charging time is about 4.5-6 hours.  Note: A: Do not direct the eye with a flashlight and watch the torch to avoid  Direct light, so as not to damage the eyes;  B: Use before the battery is fully charged in advance, away from flammable,  Explosive objects or gas. C: A flashlight placed in bags or similar packaging  Bag, careful to avoid other objects touching the switch, to avoid being exposed  To switch to light up flashlight, causing unnecessary harm.
D: Light bulb after about 30 seconds to achieve the best light, it is HID features, so if  The dimming dimming after 30 seconds will clear.
E: Use the car charger when the battery to start the engine to fully charged;
F: A place in the environment charge high temperature or continuous discharge time is  Long, the torch is slightly warming the surface is a normal phenomenon, flashlights, work  Long hours Do not touch the glass lens to prevent burns.